ENG
ARA
Description
Repeater 2G 3G 4G indoor antenna 800-2500mhz ceiling mount antenna with 2m cable
| ELECTRICAL | |
| Model | IXD-3NK-80/250 |
| Frequency Range | 800-2500MHz |
| Bandwidth | 790MHz |
| Gain | 3dBi |
| Intermodulation IM3 | ≤-95dBc |
| VSWR | ≤1.5 |
| Polarization | Vertical |
| Max power | 100 W |
| Nominal Impedance | 50 Ω |
| MECHANICAL | |
| Connector | N female or customized |
| Antenna Dimension | 180*90mm |
| Weight | 200g |
| Color | White |
| Rated Wind Velocity | 60m/s |
| Working Temperature | -40~+70℃ |
| Mounting | Fixed with Nut |
A regular cell phone repeater consists of: (full kit)
- 1 -Outdoor antenna log periodic antenna(or wall mounted, yagi antenna)
- 2 – Indoor Omni ceiling antenna( panel antenna)
- 3 – Power adapter
- 4 – User manual
- 5 – Cell phone repeater
- 6. 10 meters outdoor cable and 1 meter indoor cable
How should you install repeater (very easy and simple):
Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).
Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.
Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.
Step 4: Mount your indoor antenna with signal repeater
Step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.
Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.
Indoor and outdoor antenna must be separated by wall.
Photo:
Reviews
There are no reviews yet.