ENG
ARA
Description
Lintratek 9 Units Yagi Antenna SMA Male Connector CDMA/GSM Mobile Signal Repeater Aerial 2g/3g/4g for Outdoor Used
Product Description
| ELECTRICAL | |
| Model | OBM-9NK-171/217 |
| Frequency Range | 1710-2170MHz |
| Bandwidth | 136 MHz |
| Gain | 12 dBi |
| Beamwidth | H: 30 °E: 30 ° |
| F/B ratio | ≥18 dB |
| VSWR | ≤1.5 |
| Polarization | Horizontal or Vertical |
| Max power | 100 W |
| Nominal Impedance | 50 Ω |
| MECHANICAL | |
| Connector | SMA male or customized |
| Dimension | 0.66 M |
| Weight | 1 KG |
| Element | 8 |
| Material | Aluminum Alloy |
| Rated Wind Velocity | 60 m/s |
| Mounting Kits | U bolts |
A regular cell phone repeater consists of: (full kit)
- 1 -Outdoor antenna log periodic antenna(or wall mounted, yagi antenna)
- 2 – Indoor Omni ceiling antenna( panel antenna)
- 3 – Power adapter
- 4 – User manual
- 5 – Cell phone repeater
- 6. 10 meters outdoor cable and 1 meter indoor cable
How should you install repeater (very easy and simple):
Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).
Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.
Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.
step 4: Mount your indoor antenna with signal repeater
step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.
Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.
Indoor and outdoor antenna must be separated by wall.
Photo:
Reviews
There are no reviews yet.