60M HDMI Extender Over Single Cat5E 6 Transmitter and Receiver

The Extender uses single a Cat – 5E or Cat – 6 (recommended) cable instead of HDMI cable to transmit high definition signal up to 60 meters. It’s designed to supply for long distance transmission with high definition signal.

Features:

– Support HDMI 1.4a

– Support 3D

– Supports Bi-directional IR control

– Support highest video resolution 1080p / 60Hz

– Support 1.5Gbps data rate and tmds clock up to 148.5MHz

– Support 8 bit deep color

– Support AWG26 HDMI standard cable, input up to 10 metres, output up to 15 metres

– Signal transmission: By using single cat – 5e or cat – 6 (recommended) cable instead of HDMI cable, it can extend the distance up to 60 meters between TX and RX

– No loss of quality

– Install in minutes

– Need DC 5V / 1A power supplySpecifications:

Length of CAT – 6 / CAT – 5E cable between RX and TX: Up to 60 meters

HDMI Input: 24 / 50 / 60fs / 1080p / 1080i / 720p / 576p / 576i / 480p / 480i

Support audio: DTS / Dolby / DSD

HDMI Output: 24 / 50 / 60fs / 1080p / 1080i / 720p / 576p / 576i / 480p / 480i

Max bandwidth: 148.5MHz

Max baud rate: 1.5Gbps

Input video signal: 0.5 – 1.5Volts p – p

Output DDC signal: 5Volts p – p ( TT1L )

Input HDMI cable distance: Less than or equal to 10m AWG26 HDMI standard cable

Output HDMI cable distance: Less than or equal to 15m AWG26 HDMI standard cable

TX Max working current: 510mA

RX Max working current: 100mA

Power adapter format: Input: AC ( 50Hz 60Hz ) 100V – 240V Output: DC5V / 1A

Operating Humidity range: 5 to 90 percent RH (No Condensation)