Description
700-2700MHz Indoor Panel Antenna 2m Cable Signal Booster 2g 3g 4g Indoor Antenna
with N Type male Connector N male
ELECTRICAL | |
Model | IBG-9NJ-70/270-2 |
Frequency Range | 700-2700MHz |
Beamwidth | H:65 E:65 |
Bandwidth | wide band |
Gain | 9 dBi |
F/B ratio | ≥18 dB |
VSWR | ≤2/1.5 |
Polarization | Horizontal or Vertical |
Max power | 100 W |
Nominal Impedance | 50 Ω |
MECHANICAL | |
Connector | N male or customized |
Antenna Dimension | 225*195*50-mm |
Weight | 0.5 kg |
Rated Wind Velocity | 60 m/s |
Mounting Kits | Including |
A regular cell phone repeater consists of: (full kit)
- 1 -Outdoor antenna log periodic antenna(or wall mounted, yagi antenna)
- 2 – Indoor Omni ceiling antenna( panel antenna)
- 3 – Power adapter
- 4 – User manual
- 5 – Cell phone repeater
- 6. 10 meters outdoor cable and 1 meter indoor cable
How should you install repeater (very easy and simple):
Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).
Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.
Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.
Step 4: Mount your indoor antenna with signal repeater
Step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.
Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.
Indoor and outdoor antenna must be separated by wall.
Photo:
Reviews
There are no reviews yet.